Skip to content
Alpharetta Cabinet Studio

Kitchen Cabinets in Alpharetta, GA

Kitchen cabinets in Alpharetta for the kitchen you want to use every day, priced as a complete number before you commit.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Get my free estimate

Free estimate from a local cabinet pro. No obligation.

By submitting you agree to be contacted about your project.

Or call (678) 606-5523. Calls only, we do not receive text messages.

Call (678) 606-5523

Answered 24/7

Many Alpharetta homes still carry 1980s and 1990s kitchen cabinets with particleboard boxes, worn slides and finishes that have yellowed under years of steam and grease. Kitchen cabinets in Alpharetta, GA deserve a specification built to last. Alpharetta Cabinet Studio works from the box out, starting with the structural decisions that determine how the kitchen performs a decade from now.

  • Free estimate from a local pro
  • No obligation to go ahead
  • Semi-custom to full custom
White shaker cabinets with black pulls, a grey quartz-topped island, subway tile and a window above the sink.

About our kitchen cabinets

The construction choices made at the specification stage determine whether a painted kitchen looks new in ten years or starts peeling at the sink base in three. Plywood boxes, shop-sprayed finishes and properly rated drawer hardware are the decisions that separate a kitchen built for the long term from one that looks similar at delivery and diverges quickly after. Call for a free estimate.

Kitchen cabinets in Alpharetta

Alpharetta kitchen cabinets: reface or replace, the box decides

The question of whether to reface or replace kitchen cabinets in Alpharetta comes down to one thing: the condition of the existing boxes. If the plywood cases are sound and the frames are square, refacing is legitimate and costs less. If the lower run has swelled from years near the dishwasher, or the cases have racked because the subfloor shifted, replacement is the only path that produces a result worth keeping. Box condition, not the look of the doors, is the deciding factor.

  • A door that looks dated can be replaced. A case that has swelled and gone out of square cannot be refaced into something sound.
  • Tap the bottom of the toe kick on the lower run near the sink. If it sounds hollow and soft, the box has taken on moisture.
  • So you spend money on a reface only when the boxes underneath it are worth the investment.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

Framed vs frameless cabinets in Alpharetta

Framed or frameless, the difference is in the drawer opening

A framed cabinet has a face frame glued to the front of the box. The frame gives the kitchen a traditional look but costs two inches of the interior width: the drawer opening is smaller. A frameless box gives up the traditional look but opens the full interior to the drawer. In an Alpharetta kitchen where the drawer count is high and the cabinet run is not wide, that two inches per cabinet adds up to a meaningful storage difference.

  • Frameless cabinets are not cheaper than framed. They are different. The hinge system and the box construction are different.
  • Two inches of face frame across twelve base cabinets is two feet of drawer width that frameless reclaims.
  • So you choose the box type that matches what the kitchen actually needs, not the one that photographs better.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

Painted vs stained cabinets in Alpharetta

Painted or stained for Alpharetta: the one question that splits the bids

Painted cabinets and stained cabinets are not just two finish options. They are two different maintenance paths and two different tolerances for the wood underneath. A painted door hides the grain and can be touched up with matching paint when it chips. A stained door shows the wood character and cannot be touched up invisibly when the finish scratches. In Alpharetta kitchens with active households, painted tends to age more forgivingly because chips are patchable in a way scratches on a stained door are not.

  • A painted door that chips can be touched up with the original paint code. A stained door that scratches shows raw wood.
  • Will the painted finish look cheap? That depends on the paint quality and the door profile, not just the color.
  • So you pick a finish knowing what it looks like two years later, not just the day it is installed.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

Why Alpharetta Cabinet Studio

How to plan your project

Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.

FreeAn estimate from a local cabinet pro, with no obligation
Line by lineAsk for every cabinet to be listed in the estimate, so changes stay simple
4 to 16 wksTypical lead time, semi-custom to custom; ask for yours at the estimate
LevelledBoxes shimmed, scribed and checked before the doors go on
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

Box construction for an estate kitchen

The box is what everything else fastens to, and in a kitchen that will be lived in for twenty years, the box construction choice matters more than the door style. Plywood boxes with solid hardwood face frames are the baseline for estate-grade work. Plywood holds screws through seasonal expansion and contraction, resists the moisture that builds up around a sink base or near a dishwasher, and does not delaminate at corners the way particleboard does when the glue softens.

Dovetailed drawer boxes are a reliable indicator of overall cabinet quality. A dovetail joint distributes stress along the full depth of the corner, so a drawer that is pulled open ten thousand times over a decade stays square. Drawer boxes built with dowels or staples will rack and bind as the joint loosens. Full-extension undermount slides complete the specification: they allow complete access to the interior, support the load across both rails, and clear the drawer box so the bottom stays clean and inspectable.

Face frames on framed cabinets should be solid hardwood, typically maple or poplar, not finger-jointed shorts. The frame carries the door hinges and takes the most wear at the top edge. A softwood frame or a finger-jointed frame dents and compresses at the hinge mortise over time, causing doors to sag and gaps to open at the pull side.

Shop-sprayed finishes for a kitchen that lasts

A painted kitchen finishes its life at the sink base. That cabinet sees water, soap, grease and cleaning chemicals every day, and a finish brushed on in the field will start to cloud, crack or peel at the lower rail within a few years. The alternative is a catalyzed lacquer or conversion varnish applied in a climate-controlled shop booth, cured to a hard film before the door ships, and installed with no wet work on site.

The difference is the cure. A brushed or rolled site finish dries by evaporation in whatever humidity and temperature the room holds that day. A catalyzed finish cures by a chemical reaction that proceeds at the same rate in a controlled environment regardless of the field conditions. The result is a harder, more uniform film that resists solvents and abrasion the way an evaporative finish cannot.

Painted maple is the most common choice for a bright, clean kitchen. Stained white oak and rift-sawn oak have grown popular because the grain pattern reads through the stain and adds depth that a painted door cannot match. Both perform well under a conversion varnish. Thermofoil, which wraps a film over MDF, costs less but cannot be repaired once it lifts at an edge, and it lifts readily near heat sources like a range or dishwasher exhaust.

White shaker kitchen with brass pulls, a marble-topped island with three linen stools and two brass pendants.

Hardware ratings for wide drawers

Drawer slides carry a weight rating, and that rating matters most for the wide drawers that hold pots, pans, lids and small appliances. A standard undermount slide is rated for 75 pounds. A drawer 36 inches wide, filled with cast iron cookware, can easily push past that load limit. A slide operating beyond its rated capacity wears faster, begins to bind, and eventually damages the cabinet floor where the mounting bracket attaches.

Any drawer over 30 inches should be specified with heavy-duty undermount slides rated for 100 to 150 pounds. Tandem or wide-body slides distribute the load across a wider mounting surface and keep the drawer running smoothly through the same pull-and-close cycle that compresses a standard slide over time. The additional cost per drawer is modest compared to the cost of a service call and a repair two or three years into the kitchen.

Soft-close hinges deserve the same attention on wide, heavy doors. A full-height pantry door or a large appliance garage door exerts more torque on its hinge than a standard wall cabinet door. A hinge rated for that door weight will stay adjusted for years. One that is not rated correctly will creep open or drop at the pull side within a few months. Every door and drawer should have its hardware specified to the actual size and weight, not to a default that suits a smaller opening.

Kitchen cabinet cost in Alpharetta

Kitchen cabinet cost in Alpharetta depends first on the grade selected. Refacing the existing boxes with new door fronts and hardware runs roughly $4,500 to $10,500 for a full kitchen, assuming the existing boxes are structurally sound, level and dry. Semi-custom cabinetry, where standard box sizes are configured to the layout and finished to order, runs roughly $150 to $700 per linear foot installed. Custom cabinetry, built to the exact dimensions of the room, runs roughly $500 to $1,200 per linear foot. A full kitchen replacement across all grades can range from roughly $10,000 to $60,000.

Within any grade, the choices that move the price include door style (an inset door costs more to build and hang than a full overlay shaker), wood species (walnut and rift-sawn oak carry a premium over painted maple), box material (plywood costs more than particleboard but holds fasteners better through Fulton County summers), and the ratio of drawers to doors (a six-drawer base costs more than a two-door base of the same width). Specialty units such as tall pantry boxes, range hood cabinets and appliance garages add to the linear-foot count and to the overall price.

Hardware is a separate line item. A 30-door, 20-drawer kitchen feels the difference between a basic bar pull and a forged custom handle across every opening. Soft-close undermount slides on every drawer and soft-close hinges on every door are itemized separately and their cost scales with the number of drawers and doors in the layout.

Demolition of the existing cabinets, wall repair after demo, countertop work and any plumbing or electrical adjustments are not included in cabinet pricing and appear as separate line items in the written quote. These are estimates for kitchen cabinets in Alpharetta, GA, subject to change, and the written quote you agree sets the final price.

The process

From first call to installed cabinets

Four steps, and you make a decision at the end of each one before the next begins.

  1. Call or send the form

    Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.

  2. Free estimate

    A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.

  3. Decide, then order

    Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.

  4. Delivery and install

    Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

More cabinet options

New apartment kitchen with grey flat-panel slab-door cabinets, white quartz counter, a wall oven, induction cooktop, pull-out faucet and wood-look floor.Corridor of a newly built apartment building with floors papered and an open door showing a white shaker kitchen.White raised-panel base and upper cabinets installed with a plywood subtop, a level and a drill resting on it.

Service area

Areas covered by these guides

Questions

Kitchen Cabinets: Common Questions

Should I reface or replace my existing cabinets?

Refacing is the right choice when the existing boxes are structurally sound, plumb and dry, and the layout is not changing. A cabinet with water damage at the base, a particleboard side that has swollen from moisture, or a box that is out of square is not a good candidate for refacing. Refacing typically runs roughly $4,500 to $10,500 for a full kitchen. Replacement is the better path when the boxes have deteriorated or when the layout needs to change. The condition of the existing boxes decides the right scope, so raise it at the free estimate.

What is the difference between framed and frameless cabinets?

Framed cabinets carry a solid hardwood face frame that covers the front edge of the box. The door mounts to that frame with a standard hinge, and the frame gives the installer more tolerance for walls that are not perfectly plumb. Frameless cabinets have no front frame; the door mounts directly to the box side with a cup hinge. Frameless cabinets offer wider interior access because there is no frame to obstruct the opening. Both styles can be specified with plywood boxes, shop-finished doors and full-extension undermount hardware.

Is painted or stained wood better for Alpharetta kitchens?

Both perform well when the finish system is chosen correctly. Painted cabinets require a catalyzed finish applied in a shop booth to resist moisture at the sink base and near the dishwasher. A site-applied paint will degrade at those locations within a few years regardless of paint quality. Stained wood, particularly dense species like rift-sawn oak or walnut, resists moisture better than softer species and shows grain detail that adds depth to the room. The finish system is the critical variable in both cases.

What happens at the free estimate?

Every wall in the room is measured, including ceiling height, window and door positions, and the location of plumbing and electrical. Floor level and wall plumb are checked and documented. Existing cabinets are inspected for water damage, movement and structural condition. The position of appliances is confirmed and clearance for doors and drawers is verified. All measurements are used to generate a scaled layout drawing, itemizing every box by size, type and specification before any order is placed.

What should a cabinet quote include?

The written quote itemizes every cabinet by size, type, wood species or finish, door style, box construction and hardware specification. Interior accessories, moldings, demolition and disposal are listed as separate line items. Any wall repair or plumbing adjustment included in the scope appears with its own price and description. The quote is the document that governs the order, and the final price is set before production begins. Ask at the free estimate to review each line item before signing.

Do you carry a written warranty?

Each order comes with a written warranty. The terms are detailed in the written quote. Ask about the current warranty terms before placing any order, so the coverage is clear before any commitment is made.

Free estimate

Talk to us about kitchen cabinets

Tell us about the room, in Alpharetta or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 606-5523

Answered 24/7

Calls only, we do not receive text messages.

Call (678) 606-5523